更新时间：2024-11-09
*台电容式触控安规综合分析仪，绝缘阻抗测试 6KV/50GΩ，接地阻抗测试可达32A。具有4.3 吋多点触控面板，操作更便利；面板快捷键功能，即使穿戴高压手套，亦可快速进入测试模式；双核心技术，操作更流畅、测试更精确；采用切换式电源，可提高用电效率，环保节能省电；防止市电回灌保护线路，产品更有保障；可自动侦测输入电压为 115V 或 230V，避免误插电，造成仪器损坏。
免费咨询：0755-23217122
安规综合分析仪产品描述：*台电容式触控安规综合分析仪
产品特点：
注:
1.随身碟:
a.支援: ADATA、Apotop、Ridata、SanDisk、Team
b.介面: USB 2.0
c.容量限制: 16GB (含)以下
d.兼容格式: FAT 16 或 FAT 32
2. Barcode: 支援 CINO-F680
技术参数：
MODEL | 7410 | 7420 | 7430 | 7440 |
AC WITHSTAND VOLTAGE | ||||
Output Rating | 5KVAC/30mA | 5KVAC/30mA | 5KVAC/40mA | 5KVAC/40mA |
| Range | Resolution | Accuracy | |
Output Voltage,ACV | 0 - 5000 | 1 | ±（2% of setting + 5V） | |
Output Frequency | 50Hz/60Hz ±100ppm, User Selection | |||
Output Waveform | Sine Wave ,THD.<2% （Resistive Load）, Crest Factor = 1.3 - 1.5 | |||
Output Regulation | ± （1% of output + 5V）, From no load to full load | |||
SETTINGS | ||||
Hi-Limit AC Current, mA | 0-30.00 | 0-30.00 | 0-40.00 | 0-40.00 |
Resolution : 0.01, Accuracy : ±（2% of setting + 3counts） | ||||
Lo-Limit AC Current, mA | Range : 0 - 9.999 | |||
Resolution : 0.001, Accuracy : ±（2% of setting + 3counts） | ||||
Ramp Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
Dwell Time, second | 0, 0.3 - 999.9 | 0.1 | ||
Arc Detection | 1 - 9 ranges （9 is the most sensitivity） | |||
AC Current Offset, mA | 0 - 2.000 or Auto Set | |||
DC WITHSTAND VOLTAGE | ||||
Output Rating | 6KVDC/9999µA | |||
Output Voltage, DCV | 0 - 6000 | 1 | ±（2% of setting + 5V） | |
Output Ripple | <5%（6KV/9999µA at Resistive Load） | |||
SETTINGS | ||||
Hi-Limit DC Current, µA | 0 - 9999 | 1 | ±（2% of setting + 3counts） | |
Lo-Limit DC Current, µA | 0 - 999.9 | 0.1 | ±（2% of setting + 3counts） | |
Ramp Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
Dwell Time, second | 0, 0.4 - 999.9 | 0.1 | ||
Arc Detection | 1 - 9 ranges （9 is the most sensitivity） | |||
DC Current Offset, ?A | 0 - 200.0 or Auto Set | |||
Ramp High Current | ON/OFF, User Selection | |||
Charge - Low Current, µA | 0 - 350.0 or Auto Set | |||
Discharge Time | ≦ 200 msec | |||
INSULATION RESISTANCE | ||||
Output Rating | 1KVDC/9999MΩ | |||
Output Voltage, DCV | 100 - 1000 | 1 | ±（2% of setting + 3V） | |
Hi-Limit Resistance, MΩ | 0, 1 - 9999（0=OFF） | 1 | ±（2% of setting+2counts）at 500-1000VDC, 1 -999.9 MΩ | |
Lo-Limit Resistance, MΩ | 1 - 9999 | 1 | ||
Delay Time, second | 0, 0.5 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
Charge - Low Current, µA | 0 - 3.500 or Auto Set | |||
GROUND BOND （7440 ONLY） | ||||
Output Rating | 30A/600mΩ, 8V | |||
Output AC Current, A | 3.00 - 30.00 | 0.01 | ± （2% of setting +3 counts） | |
Output AC Voltage, V | 3.00 - 8.00 | 0.01 | ± （2% of setting +3 counts） at Open circuit | |
Output Frequency | 50Hz/60Hz ±100ppm, User Selection | |||
SETTINGS | ||||
Hi-Limit Resistance, mΩ | 0 - 150 （3 - 30A） | 1 | ± （2% of setting +2 counts） | |
Lo-Limit Resistance, mΩ | 0 - 600 （3 - 10A） | |||
Lead Resistance Offset, mΩ | 0 -200 | 1 | ± （2% of setting +2 counts） | |
Dwell Time, second | 0, 0.5 - 999.9 sec（0=continuous） | 0.1 | ±（0.1% + 0.05sec） | |
MEASUREMENT | ||||
AC/DC Voltage, KV | 0 - 6.00 | 0.01 | ±（1.5% of reading + 1count） | |
DC Voltage, V （IR） | 100 - 1000 | 1 | ±（1.5% of reading + 3V） | |
AC Current Range, mA | 0-3.500 | 0-3.500 | 0-3.500 | 0-3.500 |
3.00-30.00 | 3.00-30.00 | 3.00-40.00 | 3.00-40.00 | |
AC Current Resolution, mA | 0.001/0.01 | |||
AC Current Accuracy, mA | ± （2% of reading + 3counts） | |||
DC Current Range, µA | 0-350.0 | 0.1 | ± （2% of reading + 3counts） | |
300 - 3500 | 1 | |||
3000-9999 | 10 | |||
AC Current, A （GB） | 0 - 35.00 | 0.01 | ±（2% of reading+3counts） | |
Resistance, , MΩ（IR） | 1 - 9999 | 0.001 | ±（8% of reading+2counts）at 100-499VDC, | |
Resistance, , mΩ （GB） | 0 - 600 | 1 | ±（2% of reading+2counts） | |
GENERAL | ||||
Input Voltage AC | 115/230Vac±15%, 50/60Hz ± 5%, Fuse 5A Slow for 7410/7412 model, 6.3A Slow for 7420/7430/7440 model | |||
PLC Remote Control | Input : Test , Reset , Memory1.2.3 | |||
Output : Pass , Fail , Processing | ||||
Memory | 50 memories, 8 steps/memory | |||
Display | 20×2 LCD with back light | |||
Key Lock | To prevent unauthorized alteration of the test Parameters | |||
Calibration | Build-in software ａnd external calibrated meters | |||
Alarm Volume Setting | Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume. | |||
Rear Panel Output | YES | YES | YES | YES |
Built-in Scanner | - | 8channels | Option | Option |
External Scanner | YES | YES | YES | YES |
Smart GFI | YES | YES | YES | YES |
Analog Meter | - | - | YES | YES |
RS232 Interface | Option | Option | YES | YES |
GPIB Interface | Option | Option | Option | Option |
Printer Interface | Option | Option | Option | Option |
TUV-GS listed | - | - | YES | YES |
CE Compliance | - | - | YES | YES |
Environment | 0-40℃, 20-80%RH | |||
Dimension （W×H×D） | 430×133×300 （mm） | 430×133×500（ mm） | 430×133×500（mm） | |
Net Weight | 12Kg | 18Kg | 22Kg | |
STANDARD ACCESSORIES | ||||
Power Cord（10A） | ×1 | |||
Fuses | ×2 （Including a spare contained in the fuse holder） | |||
Hipot Test Lead ,1.5m（1101） | ×1 | |||
Return Test Cable（1102） | ×1 | |||
Hipot Return Lead ,1.8m（1103） | - | - | - | ×1 |
Ground Bond Return Lead 30A,1.5m（1104） | - | - | - | ×1 |
Hipot Output Link Lead ,1.5m（1109） | - | ×8 | - | - |
RS232 Link Cable 1.5m（1130） | - | - | ×1 | ×1 |
Disk （ RS232 test program ） | - | - | ×1 | ×1 |
*product specifications are subject to change without notice.
| ||||
发邮件给我们：xz01@junhuiyiqi.vip