更新时间:2024-11-10
DPSK针盘式扭力起子面向小容量的普通紧固作业、扭力检查、破坏性实验等,在易操作、易读取方面*。 DPSK(Ⅱ)《标准型》· 小容量的扭力螺丝起子,Z适合普通紧固作业、扭力检查、破坏性实验;· 使用方便为Z大瞄准点,扭动扭力杆,通过直观的圆形刻度板直接读数;· 左右两边方向都可以使用;· 带有左右两用的动针;· 刻度板较大,读取读数十分方便
免费咨询:0755-23217122
DPSK针盘式扭力起子
DPSK针盘式扭力起子
DPSK(Ⅱ) 《透明刻度板型》
· 因采用了透明刻度板,所以在操作时能方便、清楚地看到刀头的工作情况 ;
· 各型号同一保证精度为+-3%以内
For small-capacity general tightening torque checked, destructive experiments, etc., easy to operate, easy to read excel。
DPSK (Ⅱ)
· Small capacity torque screwdrivers, most suitable for general tightening torque checked destructive experiments;
·Easy to use for maximum aiming point, twisting the torsion bar, the circular scale plate through an intuitive direct reading;
·You can use the left and right directions;
·Moving around with a dual needle;
·Large scale plate, very convenient readings
·DPSK (Ⅱ)
·Due to the use of the transparent scale plates, so the operation can be easily and clearly see the operation of the tip;
·Various models within the same guarantee accuracy of + -3%
技术参数Parameters
型号Type | 负载范围 Load range(kgf.cm) | zui小刻度 Min scale(kgf.cm) | 型号 Type | 负载范围 Load range(kgf.cm) | zui小刻度 Min scale(kgf.cm) |
1DPSK | 0.2~1 | 0.025 | 5DPSK | 10~50 | 2 |
2DPSK | 0.5~2 | 0.05 | 10DPSK(Ⅱ) | 2~10 | 0.2 |
5DPSK | 1~5 | 0.2 | 20DPSK(Ⅱ) | 5~20 | 0.5 |
10DPSK | 2~10 | 0.2 | 50DPSK(Ⅱ) | 10~50 | 2 |
20DPSK | 5~20 | 0.5 |
|
|
|